Group 1 - Brass Section A - Waterworks Brass All brass including the ball in contact with potable water will be heavy wall design made of no lead material as defined in section 4 of current C800 specification. Parts not in contact with potable water may be made of other material suited for buried water services as specified in AWWA C800. Treading and tolerances will be in accordance with latest revisions of AWWA C800 specifications. All Ball valve, Couplings and adaptors will be pressure rated for 300 PSI. Ball valves will be supplied with blowout proof stainless steel stems with double SBR, NBR or EPDM O-ring stem seal. Stem and cap assembly will be two-piece design and will withstand minimum 200 ftp of torque. Ball seats will be made with unfilled Teflon for resilience and minimal friction. Ball will be uncoated lead free cast brass design. All ball valves will be factory tested in the open and closed position. All waterworks fittings and ball valves will be guaranteed for a minimal 40 years against factory defects. All fittings will have a lifetime guarantee against lead leachate from the casting. “Washed” brass will not be acceptable. No lead fittings will be Cambridge Brass or approved equal. Section B - Malleable Brass Fittings and Nipples All brass in contact with potable water will be heavy wall design made of no lead material as defined in section 4 of current AWWA C800 specification. Parts not in contact with potable water may be made of other material suited for buried water services as specified in AWWA C800. Treading and tolerances will be in accordance with latest revisions of AWWA C800 specifications. Group 2 – Plastic Rectangular Black Meter Box w/ Plastic AMR Lid and Polytubing The Meter Box and Lids listed in this section shall be designed to withstand loading in nondeliberate and incidental traffic. Meter Box and Lid shall be black and constructed out of modified polyethylene material for maximum durability and corrosion resistance. The black material is for maximum UV protection. The black material shall be uniform throughout the Meter Box and Lid for maximum longevity and not have a foaming agent that creates air pockets within the plastic wall. SERIES 65C SOLID BLACK POLYMER AMR LID, (DFW65C-SBSM-LID) Size: H 1-7/8” x W 15-1/4” x L 26-7/8” Vertical and Lateral Load Rating: Compliant with AASHTO, Design Load of H-10; ASTM C 857-95, Design Load of A-8, 8,000 lbs., transferred through a 10" x 10" steel plate centered in the cover and body. Compliant with AASHTO, Design Load of H-20: ASTM C 857-95, Design Load of A-16, 16.000 lbs., transferred through a 10" x 20" steel plate centered on the cover and body. This product is designed to withstand H-10 and H-20 loading in non-deliberate or incidental traffic areas. Polymer AMR/AMI Lid: The Polymer lid shall be black and have a molded finger hole. The Polymer lid shall seat securely and evenly inside the Meter Box and shall not overlap the top edge of the Meter Box. The Polymer lid shall have two (2) molded slide mount brackets for placement of AMR device. The Polymer lid shall have molded tread-pattern for skid resistance - tread dimensions shall be .188 x .938 x .150 deep. The Polymer lid shall retrofit existing concrete meter boxes with similar dimensions and be able to adjust in the field. The Polymer lid shall be recycled with a minimum of 50% Post Consumer Recycled and 50% Post industrial/ Pre Consumer Recycled Content - Verified with a LEED PRODUCT CERTIFICATION marked on the lid. 12" STANDARD PLASTIC RECTANGULAR BLACK BOX W/ PLASTIC READER LID SERIES 1200 SOLID BLACK POLYMER AMR LID, (DFW1200.SBAMR.LID) Size: H 1-3/8” x W 11-3/16” x L 16-7/16” Plastic Lid with AMR Slide Mount The Plastic lid shall have a MINIMUM weight of 2.50 lbs. The Plastic lid shall be BLACK The Plastic lid shall have a 7-1/2” x 7-7/16” slide mount attached with stainless steel screws. The Plastic slide mount shall have a molded gate for ease of installation. The Plastic lid shall seat securely and evenly inside the Meter Box The Plastic lid shall have molded diamond tread-pattern for skid resistance The plastic body shall be recycled with a minimum of 50% Post Consumer Recycled and 20% Post Industrial/ Pre Consumer Recycled Content- Verified with a LEED PRODUCT CERTIFICATION marked on the lid. SERIES 1300 SOLID BLACK POLYMER METER BOX, (DFW1300.SB.BODY) Size: H 12” x W Top - 12-5/16” x L Top – 17-9/16” Black Plastic Body The Plastic body shall have a MINIMUM weight of 7.65 lbs. The Plastic body shall be BLACK. The plastic body wilt have pipe slots on each end of the box that measure – 2-1/2” x 3-1/2" The plastic body shall have support ribbing at the base and lid opening for resistance to backfilling- as illustrated. The plastic body shall be recycled with a minimum of 75% Post Consumer Recycled and 25% Post Industrial/ Pre Consumer Recycled Content- Verified with a LEED PRODUCT CERTIFICATION marked on the box. POLY TUBING Tubing shall be NSF certified and is manufactured to meet ASTM Standard D2737 for Water Service Tubing and D2239 ID Controlled for Iron Pipe Sizes and D3035 for OD Controlled Iron Pipe Size. Poly tubing shall be High Density made from PE4710 resin, providing the highest strength pipe at the lightest weight. The manufacturer warranty shall be no less than 40 years against rot, rust, electrolytic corrosion, and defects in workmanship and materials.
