APPLICATION A. Apply paints in accordance with MPI Painting Manual, Premium Grade finish requirements. B. Spraying will not be permitted on hollow metal doors, frames and cabinetwork. Concrete block and gypsum board may be spray and rolled. C. Apply primer or first coat closely following surface preparation to prevent recontamination. D. Do not apply finishes to surfaces that are not dry. E. Apply coatings to minimum dry film thickness recommended by manufacturer. F. Apply each coat of paint slightly darker than preceding coat unless specified otherwise. G. Apply coatings to uniform appearance without laps, sags, curtains, holidays, and brush marks. H. Allow applied coats to dry before next coat is applied. I. When required on deep and bright colors apply an additional finish coat to ensure color consistency. J. Continue paint finishes behind wall-mounted accessories.
