• Replace all existing ceiling fans in their existing locations, if possible. *Some fans might need to be relocated/shifted to avoid mesh screen support wiring. • The 7 total fans must be high volume low speed (HVLS) and have a minimum diameter of 10’-16’. **Site visit required for bid, so that exact measurements can be made—venue desires the maximum diameter that can be placed in each location. • Fans must be Hunter commercial/outdoor rated (or equivalent). • Fan shafts must extend from ceiling to the lowest point above the wire/mesh grid. *Some fans might need to be relocated/shifted to avoid mesh screens support wiring. • Existing wiring must be confirmed as viable/acceptable for reuse. • Fans to be controlled via new cat5 wiring lines that feed into new touch screen control unit on the second floor of the existing production building. • If it is determined that any of the 7 fans will be relocated from their existing locations, any structural reinforcement to the ceiling structure will need to be approved prior to installations.
