Security Fence Approved Model – Ameristar Impasse II – Gauntlet Style or written approved equal, a specification sheet(s) shall be provided at time of bid submission. - Install approximately 581 LF of 7’ tall security - Three-rail design - 2.75” wide Pales - 11 ga rails - 12 ga I beam posts, - Line post to be on 8’ centers, all posts set in concrete, minimum embed 36” - Black “Perma-Coat” finish with 15-year warranty. - All posts set in concrete. Security Gates – total of 3 Approved Model – Ameristar Passport IS – Gauntlet Style or approved equal, a spec sheet(s) shall be provided at time of bid submission. - Install (2) 24 LF 7’ tall security gate with steel V-Track roll gate design, 4” gate posts - Gate to have (2) 6.625” schedule 40 weight bollard posts with yellow bollard sleeve covers for protection, a total of 4 bollard posts. - Three-rail design - Black “Perma-Coat” finish with 15-year warranty - Install (1) single swing gate 3’ opening, 3” gate posts, Shut-it original B.A weld on hinges with strong arm latch. - All posts set in concrete. Chain Link Fence Contractor shall provide the following: - Install approximately 894 LF of 6’ tall with galvanized chain link fence - with (3) strands of barbed wire, 12.5-gauge, 4-point barbs, max 5” o.c. - 9-gauge fabric with 2” chain link mesh - 3" WT/LG40 corner, end and pull posts. - 2" WT/LG40 weight line posts, - 1-5/8" diameter, 40-weight, top rail - 7-gauge bottom tension wire. - Line post to be on 10’ centers, all posts set in concrete - Tie in new fencing to existing chain link fence post using all new mechanical ties and new barbed wire as needed. - Selvages: Top and Bottom selvage twisted. Access Controls Contractor shall provide the following: - Shall be compatible with existing AIPHONE system and tie in. - (2) dual height gooseneck-stand with two access control pads with AI - IX-DV cameras - Minimum 18” diameter concrete pad, embedded 24” in the ground, for gooseneck stand - install a (120v or 240v) single phase circuit, from the nearest service panel in the facility to the gate operator with 1” fiberglass/HDPE or PVC conduit with pull string - install 1” fiberglass/HDPE or PVC conduit for data communication from existing AIPHONE master station IX-MV system to the access control pad/camera and operator with pull string