1 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37355 Welding 1 Motoman Welding Cell RS Series - ARC Welding, YRC 1000 Controller, AR900, MILLER AUTO CONTINUUM 350 Yaskawa/Motoman Motoman Welding Cell RS Series - Model 158987B000 (Includes models listed below) 2 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37356 Welding 1 ArcWorld System - RS or HS Cell: Robotic Welder -ARC Welding, YRC 1000 Controller, AR900, MILLER AUTO CONTINUUM 350 - CELL ASSY, ARCWORLD RS, YRC 1000 - This ArcWorld RS cell assembly is a small footprint (approx. 1430mm wide x 2150mm deep) cell allowing small parts for low- volume/high-mix applications. The dual weld station cell has a manually indexed rotary door. It features a single AR900 arc welding robot with YRC 1000 controller. The door is interlocked and held with pneumatic pins with robo operation for safeguarding. Dual, compact 100kg payload tabletops allow parts up to 425mm x 700mm. To ease installation, the robot, controller fixture, smaller power supplies, and operator door are mounted in a common cabinet (larger power supplies must be set up outside of the cabinet). Also included are cell guarding, operator cycle start button, E-stop, and integrated exhaust duct connection. The cell is available with the coice of a Miler AutoContinuum 350 or Lincoln R450 welder. A choice of Binzel, Tregaskiss, and Yaskawa torches and Yaskawa compact reamer are supported. Yaskawa/Motoman Model 194681-1 3 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37357 Welding 1 ArcWorld System - RS or HS Cell:Robot Assembly(s) - ROBOT ASSY, AR900, YRC 1000, WLDG, W/O CABLES, W/O PENDANT The AR900 robot assembly includes the YRC 1000 controller (does not include teach pendant). The AR900 robot has a 927 mm (36.4 in.) horizontal reach, 1693 mm (66.65) verical reach and a 7 kg (15.4 lb.) payload capacity and a +/-0.01 mm(0.0004 in.) repeatability. This robot can be floor-, wall-, or ceiling-mounted. NOTE: If wall-mount installation, the S-axis working range is restricted. Yaskawa/Motoman Model 182290-1 4 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37358 Welding 1 ArcWorld System - RS or HS Cell: PENDANT, STANDARD, YRC 1000, W/8M CABLE, W/O SOFTWARE Yaskawa/Motoman Model 177716-1 5 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37359 Welding 1 ArcWorld System - RS or HS Cell: PANEL OVERLAY, ARC WELDING, YRC 1000 Yaskawa/Motoman Model 178538-2 6 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37360 Welding 1 Weld Kit: Welding Interface Kit(s) INTERFACE KIT, UWI LINCOLN, ARCLINK-XT, ONE WLDR, NO TOPHAT, YRC 1000 Interface kit includes the new UWI welding interface, needed cabling and gland plates to connect a single Lincoln PowerWave welder to the YRC 1000 robot controller without use of a "Tophat Interface". Cables exit the YRC cabinet on predefined glandplates and connect directly to the rear of the welder. A ethernet switch is NOT provided as part of this package/offering. Yaskawa/Motoman Model 190704-2 7 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37361 Welding 1 Weld Kit:CABLE, ETHERNET, 4-WIRE, M12, MALE, SHIELDED, RIGHT ANG.4.0M Yaskawa/Motoman Model 158355-4 8 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37362 Welding 1 Weld Kit:ACCESSORY, DRESS KIT, ARC WELDING, YRC 1000, AR900, LINCOLN R450, AW-RS/HS Yaskawa/Motoman Model 195397-1 9 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37363 Welding 1 Weld Kit:FEEDROLL KIT, LINCOLN, 1.0-1.2MM,0.040-0.045 IN, V-GROOVE, W/GUIDE Yaskawa/Motoman Model 158246-4 10 TCAT-McMinnville 2790 Woodbury Hwy Manchester, TN 37364 Welding 1 Welding Power Source(s):POWER SOURCE, LINCOLN, R450,200V TO 575V, ARCLINKXT INTFACE The PowerWave R450 is an industry leading high-performane inverter power source allowing fast travel speeds, low spatter generation, superior gap bridging, and excellent penetration profiles. Fast cycle times and low-level controls are made possible with Yaskawa's UWI ArcLink Interface. Joins a wide range of material thighnesses from 0.6mm and greater. Equipped with the most comprehensive portfolio of welding modes including Nickel, Stainless, Low and High Alloy. Provides built-in free "CheckPoint" "production monitoring" and a 5 year Warranty. Operates on 200VAC without any external hardware. Yaskawa/Motoman Model 157917-10
