The Contractor shall provide a Mini-Pumper with a four (4)-door cab and seating for at least five (5) responders. This requires, at minimum, a 1500 GPM pump and a 300-gallon water tank. 4.1 PUMP REQUIREMENTS 4.1.1 PUMP MOUNT The pump shall be midship mounted with a rated capacity of 1500 GPM. The pump shall meet NFPA requirements. 4.1.2 PUMP CERTIFICATION The fire pump shall be tested to meet the flow requirements of the pump. The Contractor shall provide a written certification with the completed vehicle. 4.1.3 ADDITIONAL PUMP REQUIREMENTS The pump shall have the necessary intakes and outlets for a 1500GPM capacity. The Contractor shall include preconnected piping for two (2) 1.75” cross lays of 200’ which shall include a hose reel. 4.2 WATER TANK - POLYPROPYLENE The tank capacity shall be a minimum of 300 US gallons. 4.3 HOSE BED DIMENSIONS MINIMUM The usable hose bed dimensions shall be 49.75” wide x 85.00” long x 15.00” tall. 4.3.1 HOSE BED STORAGE CAPACITY The hose bed shall be designed to have a storage capacity for a minimum of 34.00 cubic feet of fire hose. (Not to standard) 4.4 EXTERIOR LADDER MOUNTING Exterior ladder mountings shall be provided for the specified ladders over the right-side compartments of the apparatus body. The ladder storage shall have capacity for one (1) aluminum 24 ft. extension ladder. (Not to standard) 4.5 RUNNING BOARDS One (1) set of running boards shall be mounted to each side of the chassis. The running boards shall exceed the NFPA requirements for stepping surface and slip resistance. (Not required by standard) 4.6 CHASSIS REQUIREMENTS The chassis shall have a four-door conventional cab capable of seating up to five (5) personnel and have rear wheel drive with front wheel drive capability. The GVWR shall not exceed 19,500 pounds. The front and rear axle shall both be equipped with an anti-roll bar for stability.
