A. The following are applicable to all systems unless noted otherwise. 1. System type (i.e. SY01) refers to a system signal flow for a particular space/system. X / AVSXX indicates the sheet and the detail that the system can be found within the signal flow drawings. 2. Control System a. The audiovisual control system touch panel or push-button panel associated with each system shall provide control of components within the audiovisual system. Control requirements are dependent upon the functionality of the space. Control may include, but is not limited to, the following capabilities: 1) Power the system on/off 2) Control of source device selection 3) Control of video routing to displays and other devices a) The last video source routed to a display will be the audio source utilized within the space. Coordinate final configuration with the Owner. b) On touch-panel control systems, this includes secure technician level access to configure or reconfigure default routing. c) The Contractor shall develop an easy to use interface on the touch panel that provides control of the routing assignments of the instructor’s source content to all or select displays within the space. 4) Control of audio including volume up/down/mute a) On touch-panel control systems, this includes secure technician level access to controllable aspects to the audiovisual system’s DSP settings if applicable. 5) Include a button to reset the system to its default video routes and audio levels without having to shut down and restart the system. This is for spaces with touch panel control only. b. Any other operations that the control system can control not explicitly noted.
