CONTROLLER: Remove the existing controller and replace it with a new NON-PROPRIETARY controller equipped with the following features: • Software: All programming software is non-proprietary, allowing the end user the flexibility to contract for maintenance with any elevator service or organization. • Manufacturing & Assembly: All components used in the controllers must be standard industrial electronic components that assure the highest reliability, lowest cost, and ready availability in the marketplace, resulting in lower cost of maintenance and minimal downtime for building owners. Diagnostics & Testing: Every controller we supply must pass a full-function test in the factory, where actual field operations are duplicated (as close as possible). When solid-state drives are used, drive parameters are aligned as closely as possible to actual motor conditions to guarantee quick setup and reliable operation. With all microprocessor-based systems having built-in diagnostics as a standard feature, no proprietary diagnostic tools are ever required. WIRING Remove the existing wiring and replace it with new as follows: o New traveling cable to extend from inside the elevator cab to the machine room. o New wiring throughout the hoistway. FIXTURES Remove the existing fixtures and replace them with new as follows: New fixtures will be code-compliant and equipped with all of the 2019 safety features. Install a new Car Operating panel with a flush-mounted ADA-compliant phone and communication camera. New digital position indicators – inside the car operating panel and on the egress hall landing. New hall stations on all floors. New hoistway access and fire service. New phone line monitoring. New car riding lanterns. New car top inspection. New braille on each hoistway landing. PUMPING UNIT Provide new submersible pumping unit, motor and oil. o • Motor • IMO Pumps • Maxton Valve Standard (Mounted Inside the tank) • 12 ga. Enamel Tank • Isolated Anchoring Feet • Noise Reducing Muffler • Oil Level Dip Stick • Isolated Pump/Motor Suspension for Easy Removal & Quiet Operation • Standard Size: 51” W x 42” H x 22” D o Provide new shut-off valves in the machine room & pit on existing piping. RAILS & BRACKETS Retain the existing rails and brackets.
