The successful bidder will be required to perform necessary repairs and/or installation onsite as appropriate. For every job, one mechanic and one fabrication laborer shall be required, unless otherwise approved by St. Charles Parish. The on-site mechanic shall be factory trained for one or more major pump manufactures. The on-site mechanic shall have the skill, knowledge, proficiency and other necessary qualifications to install, maintain, troubleshoot, inspect, disassemble, repair, rebuild, replace, and reassemble any of the waterworks’ pumps, pump controls, motors, and right-angle gear drives. The successful bidder’s on-site designated mechanic must have experience in the warranty repair, installation, and/or startup of centrifugal, self-priming centrifugal and multistage vertical turbine cold water pumps in sizes up to at least 36 inches in diameter. This on-site designated mechanic must have experience as a factory trained representative for major pump manufacturers such as Aurora, Crane Deming, Fairbanks Morse, Gorman Rupp, Peerless, etc. The successful bidder will be required to submit certification documents upon St. Charles Parish requests. This on-site mechanic must be capable of the repair, installation of right- angle gear drives in sizes up to 25 horsepower.
