WIRING/ELECTRICAL REQUIREMENTS Successful Vendor will furnish and install the following: 3.1 All wiring to be color coded and gauged for current load and to be loomed and bundled. 3.2 All wiring is to be soldered and shrink tubed to connections, scotch locks are not acceptable. 3.3 All switches and relays must be high quality and designed to handle the circuit load. 3.4 Connector’s must match stud size. 3.5 No air bag components are to be modified or moved from their factory locations! 3.6 80-amp breaker (WT46942) to be resettable, mounted at location designated by LSO to control all add on equipment. 3.6.1 We no longer use a circuit breaker in the tray, only the one next to the dual battery. 3.7 One (1) three (3) part busman fuse box part # WT46074 split between ignition and master power switch. 3.8 Power supply to be incorporated or installed with computer mount/plate. 3.9 Ground stud mounted in a location designated by LSO to handle equipment ground with main ground coming directly from the auxiliary battery. WT47211 LIGHT BAR (CRUISERS) Successful Vendor will furnish and install the following in Ford Interceptor Utilities: 4.1 Federal Signal Corp Valor all LED lightbar part# VALR51J-OPD1 with low power, LED takedown, and LED hot feet. 4.1.1 Federal Signal high pursuit hook feet part# HKB-FPIU20-HP 4.1.2 Manual switch to low power only in position one (1) and two (2). 4.1.3 Waterproof fitting KE007-2004-0 4.2 Light sequences to be determined by LSO.
