The following are minimum requirements for the bid. Any variation from the specifications must be written in the attached bid form as part of the bid. 1. Mission: Requested GCWR: 120000. Calc. GCWR: 150000. Calc. GVWR: 59200 2. Dimension: Wheelbase: 215.00, CA: 125.00, Axle to Frame: 59.00 3. Engine, diesel: {Cummins X15 565} Performance Series, EPA 2024, 565HP @ 1900 RPM, 1850 lb-ft torque @ 1000 RPM, 1900 RPM governed speed, 581 peak HP (Max) 4. Transmission, automatic: {Allison 4500 RDS} 6th generation controls, wide ratio, 6-Speed with double overdrive, with PTO provision, less retarder, includes oil level sensor, on/off highway 5. Clutch: omit item (clutch & control) 6. Axle, front non-driving: {Meritor MFS-13-143A} wide track, I-beam type, 13,200lb capacity 7. Axle, rear, tandem: {Meritor RT-46-164EH} Single Reduction, Standard Width, 46,000-lb Capacity, 8. Driver controlled locking differential in forward-rear and rear-rear axle, 200 wheel ends gear ratio: 4.89 9. Cab: conventional, day cab including: a. Cab rear suspension air b. Clearance/marker lights (5) led roof mounted c. Coat hook, cab located on rear wall, centered above rear window d. Console, center includes two cup holders and one additional storage area e. Console, overhead molded plastic with dual storage pockets, retainer nets and CB radio pocket; located above driver and passenger f. Courtesy light (2) driver and passenger door mounted g. Dome light, cab rectangular, door and instrument panel mounted switch activated, timed theater dimming, center mounted, integral to console h. Floor covering rubber, black i. Glass, all windows tinted j. Grab handle, cab interior (1) "a" pillar mounted, passenger side k. Grab handle, cab interior (4) "b" pillar and door mounted, two each side l. Reading light, cab located in overhead console m. Storage pocket, door (2) Full Length, Driver and Passenger Door 10. Tire, front: (2) 11R24.5 load range H HSR 3 (continental), 473 rev/mile, 75 mph, all-position
