1. Demolish and remove two existing screen units, and construction debris and dispose of all parts and materials recovered during the demolition. The screenhouse is installed with a sunroof and will require removal during the performance of work. The sunroof shall be reinstalled after the completion of work. New gaskets and accessories shall be used to reinstall the sunroof. 2. Demolish and remove existing control panels, ancillary wiring and controls. 3. Make repairs as deemed necessary to the screenhouse and the traveling screen channel prior to receiving new traveling water screens. The new traveling water screen footprint shall match the footprint of the existing screens. 4. Procure and install two new travel water screens on the existing travel channel. 5. Procure and install two new standalone local control panels in the screenhouse. Install at the same location where existing control panels are located. Control panel enclosure shall be made of fiberglass. All wiring and conduits need to be replaced with new code compliant wiring and conduits.
