LINE ITEMS 84 and 85: HOSE TEST KIT SPECIFICATIONS - HOSE TEST KIT, COLORED: all items in kit are to be powder coated finished, in a color specified by FDNY on purchase order/shipping instructions. HOSE TEST KIT, NON-COLORED: all items in kit are to be finished standard powder coat BRONZE. These specifications are intended to describe a hose test kit which will comply with NFPA 1962. Components shall be aluminum and must be rated at a minimum of 250 psi. All threads must comply with "THREADED WATER FLOW APPLIANCES FOR FDNY specifications. The markings on the fittings are to comply with the specification's item VII. MARKING and include the words "HOSE TEST KIT" maximally sized on each fitting. EACH KIT SHALL HAVE THE FOLLOWING ITEMS: 1. One (1) 2 1/2" screw type gate valve: a. 1/4" test hole in gate b. non-rising stem c. crank handle d. inlet - swivel female e. outlet - rigid male 2. One (1) 2 1/2" in-line pressure gauge: a. gauge to be fully impact protected and moisture proof c. gauge to read 0 to 600 psi d. gauge to be easily calibrated e. inlet - swivel female f. outlet - rigid male...
