A. Apron Lighting (AOA) 1. The Contractor shall provide replacement of various models/types of apron light fixtures and wall-mounted 550W LED area sources lighting/photocontrol sensors for the Apron Lighting. 2. The Contractor shall furnish all parts, labor, materials, and equipment necessary to replace existing lights with new LED pole-mounted fixtures that can provide a minimum range of foot-candle illumination along the CCIA Apron. 3. The Contractor shall verify and recommend an LED light fixture; a minimum of two to four-foot candle illumination without adding new poles. See Exhibit A for a product specification information example. The Contractor shall ensure that replacement is performed with products that are equivalent to and/or exceed ENERGY STAR-qualified and DLC-designated guidelines. 4. The Contractor shall provide products that earn the ENERGY STAR label and meet the ENERGY STAR specifications for energy efficiency and warranties. 5. The Contractor shall be responsible for traffic control in coordination with CCIA. B. Hangar Lane (Public Street Lighting) 1. The Contractor shall replace various exterior street light fixture models/types from 400W—480V high-pressure sodium light fixtures to 150W—480V area (street) flood LED sources lighting/photocontrol sensors for Hangar Lane. See Exhibit B for a product specification information example. The Contractor shall ensure that replacement is performed with products that are equivalent to and/or exceed ENERGY STAR-qualified and DLC-designated guidelines. 2. The Contractor shall provide products that earn the ENERGY STAR label and meet the ENERGY STAR specifications for energy efficiency and warranties. 3. Fixtures are pole-type luminaires that require replacement of heads and assemblies up to the base of the pole. 4. The Contractor shall furnish all parts, labor, materials, and equipment necessary to replace existing lights with new LED pole-mounted fixtures that can provide a minimum of 2-4 foot-candle illumination along Hangar Lane. 5. The Contractor shall be responsible for traffic control. C. International Drive (Public Street Lighting) 1. The Contractor shall replace various light fixture models/types with 400W – 480V area flood LED sources lighting/photocontrol sensors for the Street Lighting. See Exhibit C for a product specification information example. The Contractor shall ensure that replacement is performed with products that are equivalent to and/or exceed ENERGY STAR-qualified and DLC-designated guidelines. 2. The Contractor shall provide products that earn the ENERGY STAR label and meet the ENERGY STAR specifications for energy efficiency and warranties. 3. Fixtures are pole-type luminaires that require replacement of heads and assemblies up to the base of the pole. 4. The Contractor shall furnish all parts, labor, materials, and equipment necessary to replace existing lights with new LED pole-mounted fixtures that can provide a minimum of 2-4 foot-candle illumination along International Drive. 5. The Contractor shall be responsible for traffic control.
