AUTEL EVO MAX 4N BUNDLE The Autel EVO Max 4N features a 2.3MP starlight camera for night vision, a 50MP wide-angle camera, and a 640x512 thermal camera with 16x digital zoom and a laser rangefinder for distance measurement. A 42-minute flight time, 12.4-mile transmission range, 720° obstacle avoidance, and supports A-Mesh 1.0 networking for enhanced connectivity. Also, anti-jam/anti-interference capabilities, hot-swappable batteries, and a rugged design with an IP43 weather rating. SPECIFICATIONS Camera & Sensors Starlight Camera: 2.3MP sensor for low-light conditions (0.0001 LUX, ISO 100-450,000). Wide Camera: 50MP 1/1.28″ CMOS sensor with an f/1.85 aperture. Thermal Camera: 640x512 resolution with 16x digital zoom and a temperature range of -20°C to 550°C (-4°F to 1022°F). Laser Rangefinder: Measures distance from 16.4 ft up to 3,737 ft (5-1200m). Performance & Durability Max Flight Time: 42 minutes. Max Transmission Range: 12.4 miles (20 km) via Autel SkyLink 3.0. Obstacle Avoidance: 720° all-around coverage. IP Rating: IP43 ingress protection, making it resistant to dust and rain. Wind Resistance: Up to 27 mph (12.1 m/s). Connectivity & Intelligence A-Mesh 1.0 : Mesh networking technology for enhanced signal stability. Anti-Jam & Anti-Interference: Built-in systems for reliable operation in challenging environments. Night Tracking: The starlight camera allows for target locking and tracking at night. 3D Map Planning: Enables complex mission planning for various applications. GPS-Denied Navigation: Capable of navigating without GPS signals. BUNDLE MUST INCLUDE: 1x Smart Controller V3 1x Flight Battery 1x 64GB SD Card 1x Battery Charger and Power Cable, 2x Pair of Spare Propellers & Screwdriver 4x Screws 1x Smart Controller Lanyard 1x Smart Controller Cover 2x Smart Controller Spare Joystick 1x RC Charger RC Charging Cable Data Cable 1x 1x Rugged Case 1x User Manual Autel Robotics 1 Year Limited Warranty 9x Autel Evo Max Series Flight Battery 9 1x CDC Quad Charging Case for Autel Evo Max series Mission-Ready System Preparation Staff will full setup your system before we ship, including: - firmware / software updates on all components - system pairing / matching - bench / flight test - completely charge all batteries for Mission-ready flight out of the box In-Person Familiarization Training* 2-3 hours on site In-person staff to train on the basic operation of the equipment. See Bidding Schedule [03-3005-1]
