The Idaho Department of Parks and Recreation is seeking to acquire picnic tables and fire rings to be kept outside at the camp sites and day use areas at the State’s 30 parks to enhance the recreation of the public. . Both seats and tabletops must be anodized aluminum with brown powder coated finish Seats and tabletop must be eight (8’) feet in length with the seats being ten (10”) inches wide and the tabletop being thirty (30”) inches wide Surface height of table must be between twenty-eight (28”) inches and thirty-four (34”) inches Seat height must be between seventeen (17”) inches and nineteen (19”) inches Frame must be two and three eights (2-3/8”) inch O.D galvanized steel Frame must be supported by two (2) one and five sixteenth (1-5/16”) inch O.D galvanized steel diagonal braces Table frame design must incorporate non-tip, non-trip, walk-through features. All bends are to be tightly formed to prevent tipping when weight is on one side. IDAHO PARKS AND RECREATION must be laser engraved into the center of table using seven sixteenth (7/16”) inch font approved by IDPR Galvanized bolt fasteners and hardware must be three eights (3/8") inch diameter and must be included for assembly
