Vendor shall supply and deliver two (2) RAS Skids, each with the following specifications: 25GPM Skidded RAS System Components FRT-269 SUMP (48" x 36" x 36") sump with divider wall, creating clean/dirty sump chambers for filtration. Suction fittings for pumps, return fitting for drain, and overflow fitting 400_2 Drum Filter with controller, backwash assembly and bypass fittings. Drum filter mounted on powder coated SS rack. 220V, 1PH 24" x 24" ABS Degassing Tower with air supply 120V Qty 2) Advance series pumps with fittings and valves. Supply Loop and Filtration Loop isolated. 230V, 3PH, for use with VFD. VFDs can be run at 230v 1PH OR 230V 3PH based on customer preference. 120w UV Sterilizer with bypass plumbing, 120v DH-HP 1.5 HP Heat Pump - SPLIT- with bypass plumbing, 220v, 1PH 0.25 m3 MBBR with dedicated aeration blower. 120v 304 Stainless Steel rack with marine epoxy powder coat finish and 304 stainless steel leveling legs. Rack to support pumps, heat pump HdX, degassing tower, MBBR and UV. Drum filter with dedicated rack. Sump to sit on ground next to rack. Includes Electrical panel with wiring trough. All components will have labeled, single point connections in the wire troughs for facility hookup. All units supplied on disconnect switches and are rated for wet use. Plumbing packing includes all fittings within filtration systems.
