Cab ➢ HD Vinyl 40/20/40 Split Bench, dark grey in color ➢ AM/FM stereo with clock ➢ Bluetooth compatible ➢ Rear backup camera ➢ Air Conditioning ➢ Power Windows ➢ Heavy duty vinyl floor covering ➢ Heavy duty molded floor mats ➢ Molded cab steps ➢ Gauge package ➢ Powered and Telescopic side mirrors ➢ Federal Signal Corporation light bar model ALGT53D-AMBR1HC is to be mounted on cab with switch mounted inside cab on dash and hard wired directly to battery ➢ Electric trailer brake box (or tow command system) to be integrated into dash and tied into standard 7 pin connector. ➢ Cab to be white in color, no stripes ➢ Chrome grille ➢ Chrome front bumper ➢ Supply two sets of keys at a minimum Chassis: ➢ One ton – F350 Super Duty or approved equal ➢ 4-Wheel anti-lock brakes ➢ Power steering ➢ Power brakes ➢ Heavy duty suspension ➢ Heavy duty dual batteries ➢ Dual rear wheels ➢ LT245/75Rx17E BSW All-terrain tires ➢ 10 speed automatic transmission ➢ 6.7L V8 turbo diesel minimum ➢ Minimum 330 horsepower ➢ 3.73 rear axle ratio minimum ➢ Locking rear differential ➢ 40-gallon fuel tank ➢ Front tow hooks ➢ Transmission cooler ➢ Two speed transfer case ➢ Oil Cooler ➢ Minimum GVWR of 13,000 lbs. ➢ Snowplow prep package ➢ Heavy duty front springs ➢ 2-3” Front Leveling kit installed ➢ Standard 7 Pin Round trailer connector plug Truck Warranty ➢ 36 month or 36,000 mile bumper to bumper ➢ 60 month or 100,000 mile powertrain ➢ 60 month corrosion resistance Snow Plow ➢ Meyer 8’-10’ Super Blade ➢ Super Blade snow deflector installed ➢ Plow markers ➢ Super Blade snow shoes ➢ Pro Mount mounting system ➢ Power up, angling right and left ➢ Pistol Grip Controller ➢ Nite Saber LED Lights ➢ Minimum 5 year full warranty Service Body ➢ Furnish and install on proper 60” CA dual wheel chassis of 13,000 GVW minimum. ➢ Knapheide Model 6108 D54J or approved equal service body. ➢ Body length @108” x 94” OAW compartment depth 20”; floor width 50” treadplate. ➢ LED taillights ➢ LED compartment lights Body Shell ➢ 14 GA two-sided A40 galvanneal steel compartment wall panels, fender skirts and drip rails with 12GA two-sided A40 galvanneal steel backs, bottoms and bulkhead. ➢ 12GA treadplate interior front, backs full length welded to the compartment structure and floor. Floor ➢ Minimum 1/8” thick treadplate floor with 1 3/8” return flange on each side. ➢ Side compartment back panel overlapping and interlocking with floor flange, to provide support for weight of side compartment. ➢ Full length welded. Understructure ➢ 50,000 yield 11 gauge high strength Back Up Alarm ➢ To be electric.
