2.0 TECHNICAL REQUIREMENTS - CHASSIS The chassis will be supplied by Warren County. It will be a current model year Ram 4500, 108” CA, ambulance prep regular cab DRW chassis. 2.1 Manufacturer and Model Year: The chassis will be supplied by Warren County and will be a 2025 or newer Ram 4500. Does your bid comply EXACTLY as written? Yes____ No_____ 2.2 Chassis Specifications: 2025 or newer Dodge Ram Regular Cab, 108”CA, 2WD, Aluminum Wheels, White Exterior, Ambulance Prep chassis. Does your bid comply EXACTLY as written? Yes____ No_____ 2.3 Suspension: A new LiquidSpring hydraulic suspension shall be installed per Dodge body builder requirements. Suspension shall lower when LH rear door is opened and return to normal ride height at closure of same door. Does your bid comply EXACTLY as written? Yes____ No_____ 2.4 Mud Flaps: The completed unit is to have custom mud flaps installed. Does your bid comply EXACTLY as written? Yes____ No_____ 3.0 REMOVAL AND TRANSFER OF MODULAR AMBULANCE BODY 3.1 Ambulance Module: A Type I Road Rescue module shall be supplied by Warren County EMS and utilized for this remount. Does your bid comply EXACTLY as written? Yes____ No_____ 3.2 Dismount: Disconnect all sub systems between chassis and module. This will include all environmental connections, all electrical connections, and all structural connections. Lift the module to allow full inspection of understructure. This removal will in no way deform, disfigure, or compromise the module. Does your bid comply EXACTLY as written? Yes____ No_____ 3.3 Module Inspection: Inspect all exposed structure and framing for cracks, warpage, excessive wear, and corrosion. Any questionable areas shall be treated with dye penetrant material to expose cracks. Professionally repair as needed. Does your bid comply EXACTLY as written? Yes____ No_____ 3.4 Type Changeover: Transfer module from Dodge Type I to Dodge Type I. Any necessary module modifications shall be made in an OEM professional manner. Does your bid comply EXACTLY as written? Yes____ No_____ 3.5 Module Remount: Mount down module squarely on chassis. Remounter to use OEM rubber isolators, mounting bolts and transfer body per OEM chassis body builder guidelines. The use of aftermarket or substandard components is strictly prohibited. Does your bid comply EXACTLY as written? Yes____ No_____ 3.6 Cab Seal: Install a non-electrolytic accordion rubber boot between module and cab. Seal interface to eliminate air and water leaks. New stainless-steel bolts and/or urethane adhesive will be used to fasten boot plate to cab and or the module body. Does your bid comply EXACTLY as written? Yes____ No_____ 3.7 Trade-In: The existing Dodge Ram 4500 Type I chassis will be traded-in. This chassis currently has no know major mechanical issues and is operational.
