Replacement industrial brakes for original GE Thrustor Brakes Model CR 9516-1465 used on a moveable bridge. The original GE Thrustor Brakes Model CR 9516 are no longer commercially available. Proposed replacement brakes shall support a 13-inch brake wheel diameter and have a brake torque setting of at least 660 lb.-ft. The custom frame dimensions to match existing and the motor mount to be reused. They shall also meet requirements listed in the attached documents. Brake wheels are not required.; Replacement industrial brakes for original GE Thrustor Brakes Model CR 9516-1966 used on a moveable bridge. The original GE Thrustor Brakes Model CR 9516 are no longer commercially available. Proposed replacement brake shall be sized for a 19-inch brake wheel diameter and have a brake torque setting of at least 1800 lb.-ft. They shall also meet requirements listed in the attached documents. Brake wheels are not required.; Split Pillow block with Spherical Roller Bearings on Adapter Sleeve, Fixed Bearing, Grease Purgeable Lip Seal for a 4-15/16-inch shaft size with a Design Radial Load of 15,867 lb. ft They shall meet requirements listed in the attached documents.; Split Pillow block with Self-Aligning Ball Bearings on Adapter Sleeve. Float Bearing, Labyrinth Seal for a 3-15/16-inch shaft size with a Design Radial Load of 1,664 lb. Ft. They shall meet requirements listed in the attached documents.
