1. ONE NEWEST PRODUCTION MODEL, MINIMUM 2025 (UNUSED) TRACK EXCAVATOR 2. ENGINE-223 MINIMUM NET HP (TURBOCHARGED) 3. AIR FILTRATION SYSTEM WITH INTEGRATED PRECLEANER 4. DIESEL ENGINE (EPA-TIER 4 FINAL COMPLIANT) 5. MINIMUM TRAVEL SPEED 3.1 MPH ______ ______ 6. MINIMUM DRAWBAR PULL OF 55,303 LBS. 7. MACHINE MUST HAVE AN ADJUSTABLE ENGINE IDLE SHUTDOWN 8. MACHINE MUST BE EQUIPPED WITH COOLING FANS WITH REVERSING CAPABILITY 9. STATE OPERATING WEIGHT AS WITH ATTCHMENTS SPECIFIED – WRITE IN WEIGHT 10. MUST BE ABLE TO LIFT AND SAFELY HANDLE 60” CONCRETE PIPE IN 8FT LENGTHS ______ ______ 11. CENTRALIZED ELECTRICAL DISCONNECT SWITCH 12. PROGRAMMABLE TIME-DELAY LED WORK LIGHTS 13. ALL LIGHTS TO BE LED 14. MACHINE MUST HAVE CONTROL CIRCUITS FOR HYDRAULIC ATTACHMENTS, ALLOWING FOR OPERATION OF HIGH AND MEDIUM PRESSURE TOOLS 15. MUST HAVE ELECTRO-HYDRAULICALLY OR PILOT CONTROLLED MAIN VALVE FOR ALL IMPLEMENT FUNCTIONS 16. MUST BE EQUIPPED WITH HYDRAULIC CYLINDER SNUBBERS AT THE ROD END OF THE BOOM CYLINDERS AND BOTH ENDS OF THE STICK CYLINDERS TO CUSHION SHOCKS AND REDUCE NOISE LEVELS 17. MACHINE MUST HAVE A FULLY INTEGRATED HYDRAULIC CIRCUIT THAT DOES NOT REQUIRE MANUAL ADJUSTMENT 18. HYDRAULIC SYSTEM MUST HAVE A MINIMUM FLOW OF 124.6 GPM WITH TWO PUMPS WITH MAXIMUM PRESSURE OF AT LEAST 5,075 PSI UNDER NORMAL CONDITIONS 19. HYDRAULIC SYSTEM MUST BE ABLE TO MAINTAIN ALL OTHER FUNCTIONS WHILE OPERATING HYDRAULIC ATTACHMENTS 20. MACHINE MUST BE ABLE TO SAFELY OPERATE PILING HAMMER THAT WEIGHS 6,000 LBS., REQUIRES 53GPM, AND 4,000 PSI, AND CONNECTED BY HYDRAULIC QUICK COUPLER 21. MINIMUM 20’2” FT BOOM 22. STICK SHALL BE A MINIMUM OF 10’6” WITH A MINIMUM DIGGING FORCE OF 28,300 LBF 23. HYDRAULIC THUMB 24. HEAVY DUTY HYDRAULIC QUICK COUPLER, ABLE TO HANDLE A MINIMUM 6,000 LB HAMMER 25. 48” EXCAVATION BUCKET WITH EXTREME DUTY REPLACEABLE TEETH
