Line 1 - 22’ Aluminum Boat 4.1.1. Examples: SeaArk 2272 V-Jon, Oquawka 2272 Modified V, or TPWD approved equivalent. 4.1.2. Quantity: One (1) 4.1.3. All welded construction 4.1.4. Hull: 8 - 15 degree modified "V" 4.1.5. Aluminum Gauge/Thickness: Minimum 0.125" thickness 4.1.6. Flooring: Non-slip, diamond plate flooring with Gator Hide or similar 4.1.7. Length: Approximately twenty-two feet (22’). 4.1.8. Beam: Approximately ninety-four to ninety-six inches (94-96”) 4.1.9. Depth: 28-30” sides 4.1.10. Bottom Width: 71-73” Line 2 – 150 HP Outboard Motor for Aluminum Boat described in Section 4.1 4.2.1. Examples: Mercury 150 HP 4-Stroke, Yamaha 150 HP 4-Stroke, or TPWD approved equivalent 4.2.2. Quantity: One (1) 4.2.3. Horsepower (HP): 150 HP 4-stroke 4.2.4. Engine type: In-line 4 4.2.5. Shaft Length: Twenty-five inches (25”). Shaft length shall be appropriate for the boat model specified in Section 4.1. 4.2.6. Full Throttle RPM: 5,000 - 6,000 4.2.7. Gear Shift: Forward, neutral, reverse Line 3 – Boat Trailer for Aluminum Boat with mounted 150 HP Outboard motor as described in Section 4.1 and 4.2. 4.3.1. Examples: Marine Master, Oquawka, or TPWD approved equivalent 4.3.2. Quantity: One (1) 4.3.3. Trailer material and Hardware: Galvanized Steel 4.3.4. Capacity: Minimum of 5,000 lbs., suitable for fitting and transport of boat and outboard motor specified above including additional gear/equipment. 4.3.5. Length: appropriate length to fit specified 22’ boat above 4.3.6. Width: approximately 94-102" as required by specified boat above. 4.3.7. Swivel Tongue: Required 4.3.8. Hitch: 2” ball 4.3.9. Fenders: A. Load Bearing – Minimum 250 lbs. B. Step fenders
