Server Configuration – JUSTISHOST (Quantity: 1) The server shall be a Dell PowerEdge R360 configured in a 2.5" chassis supporting up to eight hotplug drives with a Front PERC 11 RAID controller. It will be equipped with one Intel® Xeon® E2468 processor (2.6GHz, 8 cores, 16 threads, 24MB cache, Turbo, Hyper-Threading, 65W, DDR5) and a performance-optimized memory configuration consisting of four 32GB UDIMMs operating at 5600MT/s ECC (totaling 128GB). The system will include six 480GB SATA Read Intensive SSDs (6Gbps, 512e, 2.5", hot-plug, 1 DWPD). No Trusted Platform Module (TPM) is included. The BIOS will be configured for performance, with UEFI boot mode and GPT partitioning. The server will not include additional fans, operating systems, BOSS cards, or media kits. It will feature a PowerEdge 1U LCD bezel, dual redundant 600W hot-plug power supplies (100–240Vac), and two NEMA 5-15P to C13 power cords (10 feet). Management will be handled via iDRAC9 Enterprise 16G with factory-generated credentials, and the Dell Connectivity Client will be enabled. The system will ship with ReadyRails™ sliding rails (no cable management arm) and include Basic Next Business Day support for 12 months, ProSupport Plus with 4-hour mission-critical response for two years, and Keep Your Hard Drive service for two years. Server Configuration – HUB7 and HUB8 (Quantity: 2) Each server shall be a Dell PowerEdge R360 with a 2.5" chassis supporting up to eight hot-plug drives and a Front PERC 11 RAID controller. These units will include Trusted Platform Module (TPM) 2.0 V5 and one Intel® Xeon® E-2468 processor (2.6GHz, 8 cores, 16 threads, 24MB cache, Turbo, Hyper-Threading, 65W, DDR5). Memory will be configured for performance with four 32GB UDIMMs at 5600MT/s ECC (128GB total). Each server will include four 480GB SATA Read Intensive SSDs (6Gbps, 512e, 2.5", hot-plug, 1 DWPD). The BIOS will be set to performance mode with UEFI boot and GPT partitioning. High-performance fans will be included. No operating system, BOSS card, or media kits are required. The servers will feature PowerEdge 1U standard bezels, dual redundant 600W hot-plug power supplies, and two NEMA 5-15P to C13 power cords (10 feet). Management will be provided through iDRAC9 Enterprise 16G with factory-generated credentials, and the Dell Connectivity Client will be enabled. Server Secured Component Verification will be included. The iDRAC Group Manager will be disabled, and no iDRAC Service Module will be installed. Each unit will include ReadyRails™ sliding rails (no cable management arm) and be covered by Basic Next Business Day support for 12 months, ProSupport Plus with 4- hour mission-critical response for two years, and Keep Your Hard Drive service for two years. Server Configuration – HUBTEST and ADC3 (Quantity: 2) These Dell PowerEdge R360 servers will be configured in a 2.5" chassis with support for up to eight hot-plug drives and a Front PERC 11 RAID controller. Each unit will include Trusted Platform Module (TPM) 2.0 V5 and one Intel® Xeon® E-2468 processor (2.6GHz, 8 cores, 16 threads, 24MB cache, Turbo, Hyper-Threading, 65W, DDR5). Memory will be performance-optimized with two 32GB UDIMMs at 5600MT/s ECC (64GB total). Storage will consist of four 480GB SATA Read Intensive SSDs (6Gbps, 512e, 2.5", hot-plug, 1 DWPD). The BIOS will be configured for performance with UEFI boot mode and GPT partitioning. High-performance fans will be included. No operating system, BOSS card, or media kits are required. Each server will include a PowerEdge 1U standard bezel, dual redundant 600W hot-plug power supplies, and two NEMA 5-15P to C13 power cords (10 feet). Management will be handled via iDRAC9 Enterprise 16G with factorygenerated credentials, and the Dell Connectivity Client will be enabled. Server Secured Component Verification will be included. The iDRAC Group Manager will be disabled, and no iDRAC Service Module will be installed. Each server will include ReadyRails™ sliding rails (no cable management arm) and be supported by Basic Next Business Day service for 12 months, ProSupport Plus with 4- hour mission-critical response for two years, and Keep Your Hard Drive service for two years. Dell 3 Year - ProSupport Plus, Mission Critical (Quantity: 5) Onsite Response – 2-Hour, 4-Hour or 8-Hour onsite service with 6-hour hardware repair available 24x7, including holidays. 2-hour response is not available on desktops; availability may vary by country CritSit Procedures – Severity level 1 issues will be reviewed by Dell and may be nominated for CritSit incident coverage through Dell Global Command Centers. Emergency dispatch – Onsite service technician dispatched in parallel with phone-based troubleshooting when you declare a Severity level 1 incident. Priority production – In the event of a critical situation caused by a natural disaster or other event normally excluded from the limited warranty, Dell will expedite the production of a new system(s). Storage fault monitoring – Alerts from storage fault monitoring helps you maximize uptime by identifying and correcting potential issues before they occur.
