To procure for the Purchaser a Rear Mounted 100 Foot to 107 Foot Aerial, mounted on a “custom” tilt cab chassis utilizing modern design to ensure ease of operation and provide for firefighter safety. 4.002 This aerial device must be able to short jack its outriggers for tight and narrow areas in our jurisdiction. 4.003 The aerial shall set up with a minimum of 15 inches of ground penetration for stabilization. 4.004 The completed apparatus, including the cab, body and chassis shall be constructed and assembled by the respondent and warrantied by the respondent. Individual components such as engine, transmission, axles, lighting, or aerial, may be provided by other manufactures however, the respondent shall be responsible for the coordination of warrantees and resolving any conflicts. 4.005 The apparatus shall be designed and constructed using accepted engineering, design, and construction methods, with due consideration of the loads to be sustained, and the distribution of the loads. Frame, suspension, drive line, and all other parts of the vehicle shall be strong enough to withstand the road speed, and generalservice under full load.
