II. Smoke Alarm Specifications Universal Security Instruments Smoke + Fire Alarm, Item # AMIL3051SC, or approved equivalent. 1. Conforms to UL standard 217 - 8th edition. 2. Detects both fast-flaming and slow-smoldering fires. 3. 10-year sealed battery operated. Maintenance-free battery power provides 10 years of safety protection. 4. Tamper resistant design provides a higher level of security. 5. 10-year product end of service life warning - sounds when it is time to replace detector. 6. 10-year limited warranty 7. Silence/test button 8. LED power status indicator III. Carbon Monoxide Alarm Specifications AC Powered, plug-in with Battery Backup. Kidde model KN-COB-DP2, or approved equivalent. 1. Tamper Resist Feature – Can be activated to cause unit to go into alarm if it has been unplugged or has come loose from the outlet. 2. Two (2) AA Battery Backup – Provides continuous protection even during power outages. No hardwire installation required. 3. Low Battery Hush - Silences low battery chirp warning for up to 12 hours to maintain protection without having to replace the batteries at an inconvenient time. 4. Event Memory - If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every 10 seconds. 5. Battery Pull Tab - Eliminates battery installation time. 6. Loud 85 Decibel Alarm - Alerts of deadly CO gas. 7. Green LED - Indicates alarm is receiving power and operating properly. 8. Red LED - Illuminates when in alarm mode. 9. Test/Reset Button – Tests the unit for proper operation. Resets the Carbon Monoxide alarm. 10. 10-Year End of Life Warning – Alerts user to replace CO alarm after ten (10) years of operation (40% longer than other CO alarms). 11. UL Listed – Listed by UL as a Single Station Carbon Monoxide Alarm.
