The stock for the stamps shall be 60lb Kromekote, or an equivalent, with wettable gum backing. Printing ink shall be 4-color process on the front side and PMS 421 (gray) on the back side. Printing shall be high quality – 133 line press or better. Individual stamp size shall be 1-3/8”x2” as set forth in the attached samples. Perforations shall be pinhole with 14 pinholes per inch, on all four sides of the stamps. Printing shall be two sides, head to head. Four full size final press sheets shall be provided to LDWF as soon as possible after the artwork has been provided to the Contractor. Press sheets will not be gummed, numbered, or perforated. Color Separations will be provided to the Contractor, upon award. A copy of the keyline and cromalin proof of the stamp design will be delivered to LDWF for approval as soon as possible after the Color Seperation are provided to the Contractor. Proofs must be submitted to the Director of Licensing, Secunda Byrd, for approval. Upon receipt of the final delivery, should any problems be detected, LDWF reserves the right to return any or all to be reprinted at the expense of the Contractor. Any overage of misprinted stamps must be destroyed by shredding. An Affidavit by the Contractor as to disposition of stamps shall be provided to LDWF. The Affidavit shall be provided in no less than 30 business days.
