P1 DIMENSION ICON-PT PACKAGE 27112312 - Surface gauge | 5753 <5k, 8425 DIMENSION ICON-PT PACKAGE. Dimension icon closed loop SPM. -- Includes: -Dimension Icon-PT Closed Loop Scanning Probe Microscope - performs all major SPM imaging techniques including PeakForce Tapping, ScanAsyst, TappingMode (air), Contact Mode, Lateral Force Microscopy, PhaseImaging, Lift Mode, Force Spectroscopy, Force Volume, Surface Potential*, Torsional Resonance Mode, Piezoresponse Microscopy* and Force Spectroscopy without additional hardware. The SPM performs imaging techniques on samples up to 210 mm in diameter / 15 mm thick.Stage repeatability (X-Y-axis): unidirectional 2-micron typical; bidirectional less than or equal to 3-micron; video optics 180-micron to 1465-micron aspect ratio of 1.3:1 and includes integrated vacuum pump for sample chuck. - Icon XYZ Closed-Loop Application Module-ready SPM Scan Head with a nominal range. - Icon XYZ Closed-Loop Application Module-ready SPM Scan Head with a nominal range of 90-micron x 90-micron and vertical range of 10-microns, closed-loop operation enabled with thermally compensating sensors in its X, Y, and Z-axis for high accuracy/precision for imaging, positioning, zooming, nanomanipulation and nanolithography. - 210mm General Purpose Vacuum Chuck - NanoScope 6 SPM Control Station with V10.0 or later NanoScope Software and Windows 10 Operating System - The NanoScope 6 controller includes eleven ADCs (three high speed); thirteen DACs (five high speed), four digital lines (two in, two out), three digital lock-ins, eight simultaneous data channels, digital Q control, fourteen software configurable BNC I/O signal connections, Virtual Signal Access, includes computer with Intel iCore i7 8700 processor and one 30-inch LCD monitor (100-240V, 50/60Hz, auto switching controller). Includes Analysis Software Package. Two Contact / tapping (air) cantilever holders (Model DAFMCH), 10 Sharp Nitride Lever probes (Model SNL-10), 40 TappingMode Probes (Model RTESPA-300, RTESPA-150, TESPA-V2, VTESPA-300), 20 Model SCANASYST-AIR-HPI probes, 10 Model SCANASYST-FLUID and 10 Model SCANASYST-FLUID+ probes and a set of accessories included. - Configured for 100V - Factory-supplied Monitor - One 30-inch LCD monitor, 2560x1600, 50/60 Hz refresh rate, auto switching - Includes USB speaker system - SYSTEM WITH AVH-1000-V2 - Includes required hardware for ICON6-SYS PT-version operation in Model AVH-1000-V2 Integrated Acoustic / Vibration Isolation Enclosure for Dimension FastScan and Icon SPMs P2 IC/FS ACOUSTIC/VIBE ISOLATION HOOD 27112312 - Surface gauge | 5753 <5k, 8425 IC/FS ACOUSTIC/VIBE ISOLATION HOOD -Integrated Acoustic and Vibration Isolation Enclosure for the Dimension FastScan and Icon SPMs - Dimensions: 36-inch wide by 33-inch deep by 63.5-inch high P3 4 DAYS INSTALL & TRAINING 27112312 - Surface gauge | 5753 <5k, 8425 4 DAYS INSTALL & TRAINING AT CUSTOMER'S SITE. P4 COMPLETE CARE DURING FACTORY WARRANTY 27112312 - Surface gauge | 5753 <5k, 8425 COMPLETE CARE DURING FACTORY WARRANTY -One (1) Year Complete Care Support Program during 1st Year Factory Warranty for the Bruker Nano Surfaces ("BNS")-manufactured AFM - Priority technical assistance (phone/e-mail) and priority on-line diagnostic support - No-charge advance replacement parts - Maintenance visit; a single no-charge on-site advanced scheduled maintenance visit including all travel and labor expenses. Once instrument confirmed calibrated and meeting specifications remaining work time may be used for user training and/or applications support. - Priority no-charge on-site diagnostic or repair support - Single no-fault scanner repair within program period - P5 DEKTAK PRO CONFIGURATION 27112312 - Surface gauge | 5753 <5k, 8425 DEKTAK PRO CONFIGURATION -Dektak PRO Advanced System (DPRO-A) - Capable of profiling feasures from sub-micron up to 1 mm. - Ability to measure thin film stress. - Extends stylus profiling beyond two dimensions (2D) into three-dimensional (3D) analysis with 3D Mapping functionality. - The system includes: - Motorized X/Y stage with 6" x 6" (150x150mm) of travel, motorized 360 degree rotation - includes 2-3, 4-6, or 8" vacuum chuck as standard with the system. - LIS 3, low inertia sensor with 1 to 15mg of force - Exclusive quick-change stylus technology. Re-calibration not required when exchanging styli. - High-resolution digital color camera with selectable magnification - Starter stylus (choose 2um or 12.5um) - Optically flat scan block with 55mm scan length - 4 angstrom step height repeatability, 1 sigma on 1,000 angstrom step - Automatic stitching for up to 200mm scans - 3D map collection and extensive data analysis - Automated collection capabilities with unlimited number of locations All DektakPRO units include a 1-year factory warranty. - DPRO BASE E/S/A - DPRO BASE E/S/A - DPRO-110V - CONFIGURE POWER, 100-115 VAC Configure Power for 100/115 VAC operation - DPRO-ENCLOSURE - DPRO ENVIRONMENTAL ENCLOSURE - DPRO-DESKTOP - 64 BIT DESKTOP COMPUTER with Win10 Pro operating system, Intel core i5 processor,16GB (2x8G) DDR4 Memory, 512GB solid state drive with Operation & Analysis software
