Cutting Envelope 55” x 55” Footprint 16’ x 11’ Including Accessories Linear Axis Accuracy and Repeatability +/-0.001” Z-Travel 8” of fully programable travel Speed 180”/min Slat bed support material load 400 lb./sq. ft. Table Drive System Precision Ball Screws System Access Table must have access from 3 sides for loading and unloading, such as that provided by a cantilever style layout Facility Protection Waterjet must include splash shields to contain potential water overspray High Pressure Pump Direct Drive pump to require incoming water consumption under 3 gal/min, no hydraulic fluids, and 60amps at 480V power Incoming Water Treatment Reverse osmosis and water softener for water treatment Outgoing Water Treatment Waterjet must include baffle unit to filter outgoing water and reduce sediment going down the drain Consumables Waterjet must include both pump and cutting head consumables to cover a minimum of 1000 hours of machine run time, cutting head should utilize a diamond orifice to reduce downtime Material Holding Table must include an OEM supplied built-in material holding system to improve ease of use for the operator when securing material for cutting Garnet Removal Must include an automatic garnet removal system Bladder Tank Built in air dome for submerged cutting to keep machine operation below 80 decibels Bulk Hopper Abrasive feed system should be able to be filled without needing to stop cutting operations for depressurization, minimum capacity of 600lbs. Controller Waterjet should run off a nonproprietary controls system, such as Windows 10, to integrate with other oncampus machinery Software Must include unlimited seats of premium software, lifetime support through no cost upgrades, taper compensation, and full nesting capabilities. No annual licensing fee will be paid on software. System OEM All components (table, pump, software, accessories) need to be made in the USA, supplied by a single source, and tested as a unit prior to shipping Installation and Training 2 weeks of onsite installation and training from a factory certified technician. System should also include available additional training for the life of the machine at no cost Freight & Rigging Price must include freight and rigging for in-building placement Warranty 3-year limited warranty Delivery Week of October 6, 2025
