Interior: 1. Re-work load center and main electrical service. Demo old (DIY) extension cords (that were modified to use as light fixture conduit, circuits, conduit to meet code. Re-install new lighting in basement areas where old lighting and suspect circuits are removed and reworked. The basement area has multiple problem fixtures, light fixtures and electrical circuits to be identified in mandatory “Pre-Bid site visit” with Project Coordinator and service providers. The replacement light fixtures will be incandescent and fluorescent. Quantities will be confirmed at walk through. 2. Provide and install any missing electrical switch and receptacle covers. Inspect and update GFCI outlets in kitchen, laundry area and bathroom if required to meet local and state code. 3. Update all smoke and CO detectors to meet state and local codes. Include electrical wiring as needed to meet code compliance. 4. Plumbing repairs include. A. Removing and replacing the water and waste lines for new free standing, stainless steel utility sink with proper drain sink, faucets. B. Make repairs to the water lines at the City Water Meter. Install new piping and fittings. Ensure proper stand-offs and connections. The current water supply from the meter into the home is in bad condition including damaged and bent piping with no proper stand off connections or wall anchors. C. Provide new washing machine plumbing, water supply lines and drain line, connections to waste, etc… 5. Flooring on basement steps to be vinyl tread and riser covers by Johnsonite. This is the Service Weight Round Nose (ST). Owner to select from available colors...wha
