1. These specifications cover cationic rapid setting Polymer Modified emulsified asphalt, for use in seal coats. This material shall be heated, as required, for proper application between 60°C (140°F) and 79°C (175°F). 2. The emulsified asphalt shall be homogenous, shall be miscible with water in all proportions and shall show no separation of asphalt within 30 days after delivery, provided separation has not been caused by freezing. 3. Emulsified asphalt held in storage tanks or drums for periods longer than 30 days shall be inspected visually to determine if separation occurred during storage. If no separation is noted, the emulsified asphalt shall be agitated, sampled and retested to determine its compliance with specification requirements.
