Proposal for complete design, fabrication and installation of eighty-six (86) flat ACM overlays and (1) curved, routed aluminum overlay panel. 1. Provide a complete design for each panel with graphics and text. Text for each sign to be updated by the College and incorporated into the final approved design prior to fabrication. Colors for the all components of the panels, frames, posts, graphics and text to be determined through the design process. 2. Eighty-six (86) overlays will be constructed of 1/8” flat ACM. The overlays will be prepped and painted. All copy and graphics will be vinyl. The breakdown is as follows: • Sixteen (16) single faced signs @ 52” x 21” (these overlays will be one piece with the middle map section routed out). The existing polycarbonate map panel will be reused. The header copy will be ¼” thick acrylic (painted) • Twenty-three (23) (6 double faced and 11 single faced signs) @ 68” x 36” • Three (3) (1 double faced and 1 single faced sign) @ 52” x 36” • Three (3) single faced signs @ 74” x 28”. The header copy will be ¼” thick acrylic (painted) • One (1) single faced sign @ 16” x 72” • Two (2) single faced signs @ 72” x 62” • Fifteen (15) (2 double faced and 11 single faced signs) @ 100” x 62” • One (1) single faced sign @ 36” x 62” • Fifteen (15) (6 double faced and 3 single faced signs) @ 47” x 24”
