A. Provide labor, materials, services, equipment and transportation necessary for complete and operational electrical generation systems as indicated on Contract Drawings and specified herein, including, but not limited to the following: 1. Engine generator set 2. Unit mounted cooling system 3. Unit-mounted and remote-mounted control and monitoring 4. Performance requirements for sensitive loads 5. Fuel system, including sub-base fuel tank. 6. Load Management System 7. Starting battery 8. Battery charger 9. Silencer/exhaust system 10. Remote annunciators 11. Remote stop switch 12. Outdoor Enclosure B. The engine generator will be pre-purchased by the Owner and assigned to the contractor. C. The contractor will provide all work required for the complete installation of the pre-purchased generator, including, but not limited to the following. 1. Processing of submittals. 2. Acceptance of delivery and rigging into final location. 3. Preparation of site to accept new equipment. 4. Concrete base for generator. 5. Power, control and monitoring field wiring. 6. Piping and wiring connections. 7. Identification. 8. Schedule and coordinate all required work. 9. Assist in field start-up and testing.
