Bidders must be prepared to comply with all state, federal and local requirements for play equipment. A breakdown of cost of equipment, shipping and installation is mandatory. Demolition of current playground structure and installation of surfacing material after construction of new playground is complete will be handled by City staff and should not be included as part of this scope. Playground Requirements: All public playground equipment supplied shall meet all applicable provisions of the current “Handbook for Public Playground Safety” published by the Consumer Product Safety Commission (CPSC) and of ASTM F1487 “Standard Consumer Safety Performance Specification for Playground Equipment for Public Use,” published by the American Society for Testing and Materials (ASTM). The protective play area in Bill Burke Park is approximately 5,075 sq. ft. Playground must have a total of four (4) swings. Either a single structure with two (2) bays (2 swings per bay), or two (2) structures with a single bay (2 swings per bay) is acceptable. Arch swing frame preferred. All main support posts will be a minimum of 5” OD. An aerial photo of the area with scale has been attached. The main play structures must be age appropriate for 5-12 years old with the proper signage. If possible, please include a smaller structure that is appropriate for 2-5 years old with the proper signage. All products shall bear the certification seal of the International Play Equipment Manufacturers Association.