The scope of work for the project will be as shown on the attached plan sheets and involves: 1. Highlands Road. The filling of the existing erosion area with asphalt millings (furnished by the Village and loaded onto contractor’s trucks) or from displaced soil on site, the furnishing and installation of geotextile fabric, and the furnishing and installation of size RR4 rip rap (asphalt millings may be used as bedding) to provide for positive drainage. Restoration of the area outside of the rip rap will involve placement of a minimum of twelve inches (12”) of topsoil furnished by the contractor to match the slope of the adjacent yards, followed by the installation of seed and straw. 2. Eagle Ridge Court. The realignment of a drainage swale via filling of the existing eroded area with asphalt millings (furnished by the Village and loaded onto contractor’s trucks) or from displaced soil on site, the excavation and reshaping of the existing rip rap area, the furnishing and installation of geotextile fabric, and the furnishing and installation of size RR4 rip rap (asphalt millings may be used as bedding) to provide for positive drainage. Restoration of the area outside of the rip rap will involve placement of a minimum of twelve inches (12”) of topsoil furnished by the contractor to match the slope of the adjacent yards, followed by the installation of seed and straw. The work at both locations is generally located within an existing 15’ wide drainage easement. Equipment and work will be confined to this easement and/or right of way and the contractor shall use mats to access the work areas so as to protect the adjacent yards which contain irrigation systems and/or private sewage lines. The adjacent residents have been notified of the project. Any work or access route that is proposed outside of the drainage easement shall be coordinated with the residents and will be the responsibility of the contractor. This is a prevailing wage project. Certified payrolls will be required prior to issuance of final payment.
