The Contractor shall perform the following: Verify all dimensions in the plan set and provide shop drawings for approval by owner prior to fabrication. Take all precautions necessary to prevent damages when delivering materials to site and provide covering to prevent rusting. The Contractor shall provide a storage location for all materials stored on site during the term length of the contract. The location will be approved by the Project Manager prior to delivery. The awning shall be fabricated in accordance with the attached plans. Overall dimensions are 100’ wide, 24’ deep, and 17’ tall at the highest point. The roof shall have a 1 on 12 slope and consists of 26ga galvalume roofing panels to be pre-cut and sized to the structure.