3.2.1.1 Site Preparation: Install privacy windscreens on existing 6-foot perimeter fences along public rights-of-way and adjacent park areas. 3.2.1.2 Surface Removal & Preparation: Remove and dispose of existing plaster and surface materials in compliance with all regulations. Inspect the underlying concrete shell for damage and make necessary repairs to ensure a sound substrate. 3.2.1.3 Coping Cleaning: Clean all coping using acid wash and pressure washing, then apply a matte sealant. 3.2.1.4 Drain & Pipe Cleaning: Clear all drain pipes to remove debris and ensure proper function. 3.2.1.5 Surface Resurfacing: Install a new PebbleTec PebbleFINA finish in "Acquos" color, with a minimum thickness of 3/8 inch. The product must meet the following: 3.2.1.5.1 Compressive strength: ≥ 9,900 psi (28 days) 3.2.1.5.2 Tensile strength: ≥ 520 psi (28 days) 3.2.1.5.3 Must be applied by Authorized Applicators (certification required in proposal) 3.2.1.5.4 Application must be consistent in color, completed in one continuous day to prevent delamination 3.2.1.5.4 Installation must comply with Florida Department of Health and National Plasterers Council standards 3.2.1.6 Tile Replacement: Replace all pool tiles (perimeter, depth markers, lane striping) and grout to match existing materials. If unavailable, submit samples of alternates for City approval. 3.2.1.7 Waterproofing & Joint Sealing: Remove and replace all expansion joints and apply sealants to ensure waterproofing between the pool shell, coping, and surrounding deck. 3.2.1.8 Lane Markings & Visual Elements: Reapply lane markers, depth indicators, and visual elements to match existing and comply with competitive and recreational swim standards. 3.2.1.9 Deck & Surrounding Area Restoration: Restore all disturbed areas, including fencing, landscaping, irrigation, drainage, and concrete surfaces, to original or better condition at no additional cost to the City
