(1). Three-part, carbon interleaved, Magnetic Ink Character Recognition (MICR) encoded set measuring 8⅝" x 3½" overall including a ⅝" stub at left side of form, ¼" top margin, and ⅝" bottom margin below the Convenience Amount Rectangle (CAR). The bottom margin is reserved for MICR encoding numbers. Form measures 8" x 3½" without stub. The set shall consist of three (3) parts and two (2) black one-time use carbon sheets. The three (3) parts and carbon sheets shall not tear or skew when processed on a typewriter or handwritten upon with a ballpoint pen. (2). Each group of deposit slips shall have the office name and office number printed in the upper right-hand corner and sequential numbers on the left portion of the form. The variable information on each deposit slip, such as the office name, office number, and deposit slip number shall be created and printed by the Contractor. (3). Print all parts in set the same except: a. MICR encoding prints on parts one (1) and two (2). b. Marginal routing instruction on the right side of form, center placement, shall be printed in RED INK and shall read as follows: 1. Part one Original: TO LOCAL BANK 2. Part two Duplicate: TO LOCAL BANK 3. Part three Triplicate: TO STATE AGENCY BRANCH OFFICE (4). Form Types, Form Numbers, and Ink Colors: a. Field Offices ADM 442 FO (REV. 10/2023) (Lavender, PMS 523) b. Auto Clubs ADM 442 AC (REV. 10/2023) (Blue, PMS 277) c. Headquarters ADM 442 HQ (REV. 10/2023) (Green, PMS 331) d. Miscellaneous ADM 442 M (REV. 10/2023) (Pink, PMS 196)