Louisville Water Company is requesting Bids consists of providing all labor, rigging, tools, equipment, and materials to restore BPS and PRV. Including replacing pumps, strainer, check valves, isolation valves, pressure controls including piping and gauges, Sump Pump including pump, pit, and discharge, vent and blower including existing mushroom caps, heater, dehumidifier, hatch handle and seal, anode test stations, ladder and floor mat, flood alarm, lights, signage and other items included in drawings. Reweld and recoat exterior of piping and floor supports. Cut and Plug existing recirculation line. Replace meter box enclosure for existing electric service. Replace existing service disconnects and remove existing telephone box. Replace bulbs, selector switches, and other items in the MCC, add spare conduit to re-route wire coming through existing vents. Replace existing accessory receptacles. Recoat all interior coating including steel surface preparation, Replace existing PRVs, gate valves, ladder, Holt-Open Arm, seal and other hatch hardware. Install supplemental piping and recoat flanged piping and hardware. All of the above shall be made ready for use in accordance and compliance with the Contract Documents, Plans, and Louisville Water Standard All correspondence must be made through the Vendor Portal.