1 A. Supply one (1) non-clog submersible wastewater pump, adapter bracket if needed and associated equipment for the Lift Stations as shown in Appendix C, capable of handling raw, unscreened sewage and meeting the performance requirements for each station: See Appendix C for duty points. 2 Manufacturers: Subject to compliance with requirements, provide products by one of the following: (a). SULZER (b). Flygt (c). Approved Equal 3 Each motor shall be supplied with forty-nine (49) feet of properly sized electric submersible cable sized in accordance with NEC & CSA standards. 4 The pump, with its appurtenances and cable, shall be capable of continuous submergence underwater without loss of watertight integrity to a depth of sixty-five (65) feet. 5 Each pump shall be fitted with stainless-steel lifting chain. 6 Referenced Standards: (a). American Iron & Steel Institute (AISI) (b). American Society for Testing and Materials (ASTM) (c). Factory Mutual (FM) (d). Hydraulic Institute Standards for Centrifugal, Rotary, and Recip. Pumps (HI) (e). National Fire Protection Association (NFPA) (f). National Electric Code (NEC) (g). National Electrical Manufacturers Association (NEMA) (h). Anti-Friction Bearing Manufacturers Association (AFBMA)
