I. ENGINE a. Minimum requirement: wet sleeve, turbo-charged inline 6 cylinder b. Horsepower: Minimum 330 peak HP c. Torque: Minimum of 1000 lbs at 1400 rpm d. Equipped with a minimum 9 gallon DEF fluid heated tank, with aluminum cover e. Air cleaner: Single element, air restrictor gauge mounted in cab f. Oil pan heater: 120 volt/750 watt, wired to the outlet under cab drivers door w/spare power pigtail for additional heater g. Radiator: Crossflow series system, charge air cooler with transmission cooler h. Starter motor: 12 volt i. Alternator requirement: 12 volt, 160 amp capacity, Bosch pad mount j. Batteries: Minimum (4) group 31, 12 volt, minimum of 3600 cold-cranking amps k. Exhaust: Single stack mounted on the right-hand side of the cab. Exhaust turnout on top of the stack. Forward enough for wing post installation. l. Fuel filters/Water separator: Spin-on type. Additional fuel heater/filter frame mounted behind fuel tank on driver’s side for easy access. m. Fuel tank: Top draw, 70-gallon w/steps. Round non-polished aluminum with quick-connect outlet mounted left side, under cab with steps. Fuel lines nylon tubing with O-ring Snap-On quick connect fitting at both ends, with SS straps
