To furnish all labor, materials, tools, equipment, and supplies necessary to install one 42’wide, 12’ deep, and 14’ tall, metal cover over an existing set of bleachers. Canopy The covering shall be 12’ wide x 42’ long x 14’ tall. The Contractor shall install eight, 12" diameter x 4' deep concrete piers. The Contractor is to install eight 4”x4”x16’ metal posts (as per Attachment D – Drawings). All posts shall be cemented no less than 2’ deep into the concrete piers during the pour. Install approximately 380’ of horizontal support/grid with 6” metal C channel, or equivalent material, to support roofing material. Structure shall be welded at connection points. Covering panels for canopy shall be 3’ wide x 12’ long, 26 gauge, tan, commercial grade, metal panels. (Approximately 14) Side panels for canopy shall be 3’ wide x 4’ long, tan, commercial grade, metal panels. (Approximately 22) The structure will have approximately 122’ of corner and gable trim material, and approximately 66’ of J trim. The roofing shall be set at 1” on a 12” pitch. Shall have a 3’ side wall on the rear of the structure. Side walls shall start out at 3’ and cut to match pitch of building ending in 4’toward the front of the building. All edges will require metal edge material and capping. All exposed metal posts to be painted with weather resistant, brown paint.
