Contractor shall provide, install, program and integrate all hardware below and meet specified hardware software requirements with existing access control system. within 60 days upon approval of contract. The new panels are to be installed on existing enclosure. Install iStar Ultra G2 16-reader, iStar Ultra G2 8-reader, and iStar Edge G2 4-reader, Power System for Access control, Enhanced RM-4 modules and Card Readers OSDP (best OSDP V2). These will be installed, programed to existing security access control system currently running Cure 2.9 Version, three locations, two (2) Rancho Cordova area and one (1) in the Sacramento area (address, description and quantities below). 1. At 3101 Gold camp Drive Rancho Cordova CA 95670. Remove existing (5) Five iStar Pro panels, and (3) three iStar Edge panels with their corresponding power system, and fifty-seven (57) card readers. Replace, install and program five (5) new iStar Ultra G2 16 reader, (5) five 16 door access power system, (3) three new iStar Edge G2 4 door no enclosure, and PoE- Plus module, five (5) new OSDP /RM-4E-G2 Enhanced RM-4 board, sixty (60) new iClass SE Smart Card Reader. Devices are located at different rooms and gates/doors throughout the premises. 2. At 10860 Gold Center Drive Rancho Cordova CA 95670. Remove (2) two existing iStar Pro panels and their corresponding power system, remove 31 card reader. Replace install and program two (2) new iStar Ultra G2 16 reader, two (2) 16 door access power system, install one new OSDP / RM-4E-G2 Enhanced RM-4 board, and thirty-one (31) new iClass SE Smart Card Reader. Devices are located on the same building throughout four (4) floors. 3. At 10173 Croydon Way Suite #5 Sacramento CA 95827. Remove one (1) existing iStar Pro and it's corresponding power system, remove 3 card readers. Replace, install, and program one new iStar Ultra G2 8 reader, one (1) 8 door access power system, install three (3) new iClass SE Smart Card Reader.
