24.1. In responding to the bid invitation, the prospective Vendor shall address all requirements for information as outlined herein. 24.2. Reservoir Tanks: 24.2.1. Two (2) each 75 to 80-gallon capacity reservoir tanks designed to fit in the triangular space of an eight (8) foot slide in "V-Box" salt/sand spreader and not protrude past a point that would interfere with mounting the salt/sand spreader in a dump body. 24.2.2. The tanks shall be rotationally molded from the linear polyethylene resins, treated with long term ultraviolet radiation stabilizer and be molded with heavy duty bottom and side walls to resist abrasion. 24.2.3. Two (2) each 6" fill caps to be supplied with gaskets. 24.2.4. Tanks to be constructed of a minimum 1/4" material throughout and comers to be minimum ½" to ¾" radius. 24.2.5. Supply parts to be minimum ½" and must not be spin welded. 24.2.6. Suction parts to be 1 ½" molded in a brass insert or a compression fitting. 24.2.7. Each tank shall be equipped with a port for ¼" tum PVC ball valve to isolate the liquid in the tank. 24.2.8. ¼" Tum PVC ball valve to fit port shall be provided. 24.2.9. Each tank shall be equipped with a pressure and vacuum vent.
