1. One Ton Heating, Ventilation, and Air Conditioning Unit Example model: Bard Part Number W12AB-A05XXXXXJ or TCEQ approved equivalent a. Must be wall mountable. b. Existing opening measures 48”x 30.16” x 14.63”. For any unit bid that is not appropriately sized for the existing opening, the increased cost of installation will be included in the best value calculations. b. Must have minimum cooling capacity of 13,000 British Thermal Units (BTU)s per hour c. Must be minimum 11 Energy Efficiency Ratio (EER) certified in accordance with ANSI/ARI Standard 390-2003 d. Must be beige baked enamel on galvanized 20-gauge zinc coated steel e. Must include 5kilowatt factory installed electric heat strip f. Must be 230 volts, single phase, 60 hertz g. Must include controls with automated reset high- and low-pressure controls, low ambient control, and alarm relay h. Must use 1-inch MERV2 disposable filters i. Must include fresh air damper j. Must include manufacturer’s minimum five-year limited parts warranty 2. One- and One-Half Ton Heating, Ventilation, and Air Conditioning Unit Example model: Bard Part Number W18AF-A05XX4XXJ or TCEQ approved equivalent a. Must be wall-mountable b. Existing opening measures 74.563”x 33.3” x 17.125”. For any unit bid that is not appropriately sized for the existing opening, the increased cost of installation will be included in the best value calculations. b. Must have minimum cooling capacity of 17,400 British Thermal Units (BTU)s per hour c. Must be minimum 11 Energy Efficiency Ratio (EER) certified in accordance with ANSI/ARI Standard 390-2003 d. Must be buckeye gray baked enamel on galvanized minimum 20-gauge zinc coated steel e. Must include 5kilowatt factory installed electric heat strip f. Must be 230 volts, single phase, 60 hertz g. Must include controls with automated reset high- and low-pressure controls, low ambient control and alarm relay h. Must use 1-inch MERV2 disposable filters i. Must include fresh air damper j. Must include manufacturer’s five-year limited parts warranty 3. Condenser Capacitor, 25/5 microfarads (MFD), 370 volts, 2” radius, compatible with Bard W18A 1.5 tons units, FMW part # N145796, Bard Part No: S8552-046 or equivalent. 4. Capacitor, 20/5 MFD 440 volts 2” radius, compatible with Bard W18A 1.5 tons units, FMW part # N157941, Bard Part No: 8552-090BX or equivalent. 5. Capacitor, 5 MFD, 370 volts, boxed, compatible with Bard W18A 1.5 tons units, FMW part # N024373, Bard Part No: 8552-002BX or equivalent. 6. Heat Strip, 5KW, 240 volts, 2 Term L, compatible with Bard W18A 1.5 tons units, FMW part # N137237, Bard Part No. 8604-089BX or equivalent.
