1. Cab & Chassis 1.1. GVWR: 35,000 lbs. 1.2. Frame: 1,200,000 RBM (Resisting Bending Moment) ‐ Bidder should list section modulus and yield strength below Section Modulus: Yield Strength: 1.3. Cab & Axle Positions 1.3.1. Front axle: For the purposes of this solicitation, set‐forward‐axle (SFA) is considered equal to set‐back‐axle (SBA); however, SBA is the preferred option 1.3.2. Cab to Axle (CA): 84”clear* 1.3.3. Center of rear axle to end of frame (AF): 49”* 1.3.4. *Values given here are minimums. The space between cab and dump body shall not exceed 10 inches. Truck vendor and dump body manufacturer/upfitter shall coordinate in selecting a cab to axle dimension that is compatible with the required body length and ensures proper load distribution to the front and rear axles in accordance with manufacturer specifications and industry practice. 1.4. Front Bumper 1.4.1. Full width all‐steel front bumper 1.4.2. Two (2) frame mounted tow hooks, one on each frame rail 1.5. Cab 1.5.1. Conventional day cab 1.5.2. Tinted safety glass 1.5.3. Full width exterior cab mounted sun shade with integral clearance lights 1.5.4. Cab entry handles, driver & passenger side 1.5.5. Outside mirrors, driver & passenger side 1.5.5.1. Power adjustable 1.5.5.2. 90 sq. in. minimum 1.5.5.3. Heated 1.5.5.4. Two (2) adjustable spot mirrors, one (1) per outside mirror 1.5.6. One (1) roof mounted air horn & one (1) standard electric horn 1.5.7. Seats 1.5.7.1. Air ride driver seat, supplied by engine mounted compressor 1.5.7.2. Air ride passenger seat preferred, not required 1.5.8. Manufacturer’s highest level sound insulation package 1.5.9. Wing dash, if available (will not be used for spec. compliance to determine award) 1.5.10. Gauge package including the following gauges: 1.5.10.1. Air cleaner restriction 1.5.10.2. Coolant temperature 1.5.10.3. DEF 1.5.10.4. Fuel 1.5.10.5. Oil pressure 1.5.10.6. Primary and secondary air pressure 1.5.10.7. Speedometer 1.5.10.8. Tachometer 1.5.10.9. Voltmeter 1.5.10.10. Gear indicator 1.5.10.11. Odometer 1.5.10.12. Total engine hours 1.5.10.13. Trip hours 1.5.10.14. Trip odometer 1.5.10.15. Transmission temperature 1.5.11. Dual sun visors 1.5.12. Two (2) cup holders, integral to dash 1.5.13. 3‐point seat belt for each seat. Manufacturer’s high visibility color (Orange, Red, Green, or Yellow) preferred for all seat belt webbing. 1.5.14. Climate control, including air conditioning, heater, & defroster 1.5.15. Power windows & power door locks 1.5.16. Tilting and telescoping steering wheel
