Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to the following: 1. All Wood Lockers (Basis of Design – Standard Wood Lockers) a. 26” wide lockers – Field verify all dimensions and fabricate new lockers to match existing locker configuration. 2. Ideal Products, Inc. 3. List Industries Inc. B. Construction Style: Manufacturer's standard. C. Final Assembly: Manufacturer's standard factory assembly. D. Locker Body: Fabricated from plywood panels covered on both sides with thermoset decorative overlay. 1. Side Panels: 3/4 inch (19 mm) thick. 2. Back Panel: Manufacturer's standard 1/2 or 3/8 inch (13 or 9.5 mm) thick. 3. Top Panel: Manufacturer's standard 3/4 or 5/8 inch (19 or 16 mm) thick. 4. Bottom Panel: Manufacturer's standard 3/4 or 5/8 inch (19 or 16 mm) thick. 5. Exposed Panel Edges: Solid wood to match locker body and doors. E. Flush, Solid-Wood Doors: 3/4-inch- (19-mm-) thick, solid wood; end and edge glued; maple, plain sawn. F. Louver Wood Doors: Solid-wood stiles and rails, 3/4 inch (19 mm) thick, with 1/4-inch- (6-mm-) thick, angled, solid-wood louver panels fixed in position. Dowel and glue stile-and-rail joints. Provide maple, plain sawn. G. End Panels: Match style, material, construction, and finish of wood-faced wood doors. H. Shelves: Fabricated from 3/4" plywood panels covered solid wood trim...
