Mill and Pave Mill 2” depth the full width of the driving lanes for all roads under this contract Re-pavement section to consist of 0.05 gal/sq yd bituminous tack coat and 2” TDOT Grading D mix Installation of extruded concrete curb on subbase where indicated in these specifications Temporary traffic striping of binder course (if necessary) and high visibility striping of surface course to consist of 100-120 mils screed extruded hot applied thermoplastic paint with high visibility beads (Type I and IV) embedded 50-60% Thermoplastic Striping (Little Debbie Parkway and University Drive) High visibility striping to consist of 100-120 mils screed extruded hot applied thermoplastic paint with high visibility beads (Type I and IV) embedded 50-60%. A portion of Little Debbie Parkway will involve application on a concrete bridge structure. Road/Parking Lot Construction Mill, excavate and construct a new pavement section (stone, binder, and surface) at the location indicated in these specifications. High visibility striping to consist of 100-120 mils screed extruded hot applied thermoplastic paint with high visibility beads (Type I and IV) embedded 50-60%.
