2. Line 1 - Feral swine trap with camera to remotely trigger traps or approved equal 2.1 – Quantity 4 2.2 - Trap panels and gate frames must be 96" wide and 66" tall. 2.3 - Trap Panels must be constructed/covered of 6 gauge, 2”x4”, galvanized, welded wire mesh that is 96 inches long and 60 inches high starting at the bottom rail of the panel. 2.4 - Gate Panels must be constructed/covered with 6 gauge, 2”x4”, galvanized, welded wire mesh that is 91.5 inches long and 49 inches high starting at the bottom rail of the panel to the top rail. 2.5 - All Panels, frames, gates and pins must be painted with F77V100 Quick Dry Industrial Enamel –Color 7054 Oak Leaf Brown. 2.6 - Trap must have dual pin collars on each side of every gate frame and trap panel. 2.7 - Each trap panel or gate frame panel must be easily attached to each other using two pins per side (4 total per panel). 2.8 - Pins must be included with trap package to fully assemble the trap with one gate frame and eight trap panels. 2.9 - Pins must have a 2” top bend handle with a 10” length (12” total) and made of ½” steel round bar 2.10 - Gate faces vertical runners must be constructed of 1” square 16 -gauge steel tubing. 2.11 - Gate face horizontal runners and vertical brace constructed of 1”x1 ½” 14-gauge steel tubing.
