1 Approx. 60 tons HYDRO FLUOROSILICIC ACID, 23% (4,500 gallons/delivery). Quote is for the City of Alcoa only, bid is no longer combined with City of Maryville / per ton $_________ 2 Approx. 30 dry tons CAUSTIC SODA, 25% (4,500 gallons/delivery) / per dry ton $_________ 3 Approx. 35 totes SODIUM HYPOCHLORITE, 12.5% (330 gallon rotomolded HDPE returnable totes) / per tote $_________ 4 Approx. 120 tons SODIUM CHLORIDE, bulk food grade, NSF approved. Must not contain organic binders, anti-caking agents, flow control agents, or resin cleaning material. Must meet the following purity specifications: NaCl: 99.7% minimum Calcium and Magnesium as Ca 0.30% maximum Surface Moisture 0.10% maximum Water Insolubles 0.02% maximum Lead 0.0007% maximum Copper 0.0003% maximum Iron (as Fe) 0.0002% maximum Fluoride 0.01% maximum / per ton $_________ 5 Approx. 100 tons ALUMINUM CHLOROHYDRATE (ACH) The following products have been tested and deemed acceptable for use by the City of Alcoa: DelPAC XG- USALCO Sumalchlor 50- Summit Chemical Specialty Products GPAC 2800- Gulbrandsen Technologies PAX XL19- Kemira The above listed products are proprietary in nature. If you offer a product that you believe to be equal to that described above, you may quote it on a separate form. The City of Alcoa WTP is capable of receiving a full truckload (4,500 gallons) of product. A TRIAL RUN OF YOUR PRODUCT MAY BE REQUIRED PRIOR TO ACCEPTANCE OF YOUR BID. SUCH TRIALS MAY REQUIRE A SAMPLE OF 50 GALLONS TO BE PROVIDED, AT NO CHARGE, TO THE CITY OF ALCOA. A CERTIFICATE OF ANALYSIS WILL BE REQUIRED AND MUST BE APPROVED BY OUR MEMBRANE MANUFACTURER PRIOR TO ACCEPTANCE.
