1) Provide all necessary materials, equipment, and labor necessary for the construction of the shower building as well as complete transportation from the manufacturer’s location, unloading and excavation as needed and/or installation for each shower building as requested. 2) Meet the structural design provisions of the 2018 IBC, IMC,IPC,IFGC,IEC, IEBC,IFC Codes, NFPA 13, NFPA 72, and Kansas Fire Prevention Codes or any other codes as required by the 2024 SOK Building Design and Construction Manual 3) Meet the requirements of the 2010 Americans with Disabilities Act Requirements and Uniform Federal Accessibility Standards. 4) Meet the following specifications for construction: a) ASTM C33 Concrete Aggregates b) ASTM C39 Method of Test for Compressive Strength of Cylindrical Concrete Specimens c) ASTM C94 Standard Specification for Ready-Mixed Concrete d) ASTM C143 Method of Test for Slump of Concrete e) ASTM C150 Standard Specification for Portland Cement f) ASTM A185 Standard Specification for Steel Welded Wire Reinforcement, Plain, or Concrete g) ASTM C192 Method of Making and Curing Test Specimens in the Laboratory h) ASTM C231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method i) ASTM C309 Standard Specifications for Liquid Membrane-Forming Compounds for Curing Concrete j) ASTM C494 Standard Specification for Chemical Admixtures for Concrete k) ASTM A615 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement l) ASTM C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete m) ASTM C979 Standard Specification for Pigments for Integrally Colored Concrete n) ACI 211.1 Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete o) ACI 306 Cold Weather Concreting p) ACI 318 Building Code Requirements Structural Concrete and Commentary (includes Errata) q) PCI MNL 116 Quality Control for Plants and Production of Precast Prestressed Concrete Products
